LC - PACO type LC is a Close Coupled, single stage, end suction centrifugal pump. The PACO Close Coupled design features a short shaft for minimum overhang and minimum shaft deflection. All models may be mounted vertically or horizontally, with discharge connections available in several positions
	LF - PACO Type LF is a Frame Mounted, single stage, end suction centrifugal pump. The PACO Frame Mounted pumps with their heavy frames, shafts and ball bearings are ideal for reliable heavy duty service. They are available in 6 different frame sizes to match HP requirements up to 300 HP.
	LCV - PACO type LCV is a Vertically Mounted, single stage, end suction centrifugal pump. The PACO LCV features a short shaft design for minimum overhang and minimum shaft deflection. All models are provided with suction elbows in a variety of sizes and lengths and include separate mounting stands. Discharge connections are available in several positions

Split Case Pumps

	KP - PACO type KP is a Horizontal Split Case double suction centrifugal pump. Pump casings are horizontally split at the shaft centerline to simplify inspections and maintenance. Double suction impellers are dynamically and hydraulically balanced and are available in bronze, cast iron, and other special alloys for specific applications. The cartridge type bearing housings allow a short bearing span for minimum shaft deflection. Oversized heavy duty ball bearings provide long, trouble-free service in continuous operations.
	KPV - PACO type KPV is a vertically mounted Split Case double suction centrifugal pump. Pump casings are vertically split at the shaft centerline to simplify inspections and maintenance. Double suction impellers are dynamically and hydraulically balanced and are available in bronze, cast iron, and other special alloys for specific applications. The cartridge type bearing housings allow a short bearing span for minimum shaft deflection. Oversized heavy duty ball bearings provide long, trouble-free service in continuous operations.

In Line Pumps

	VL - PACO type VL is a close coupled, vertically mounted In-Line Pump. The suction and discharge connections are the same size to simplify piping. The type VL design incorporates a short shaft with minimum overhang reducing shaft deflection. Back pull out design allows rotating assembly to be removed without disturbing the volute or piping for ease of maintenance and service. 3" discharge and larger PACO In-Line Pumps feature an exclusive double volute design to reduce radial thrust and prolong bearing life.
	VLS - PACO type VLS Vertical In-Line Pumps are available in a wide selection of metallurgical and mechanical options to meet specific pumping requirements. Suction and Discharge connections are the same size to simplify piping. The type VLS design incorporates a short shaft with minimum overhang reducing shaft deflection. Back pull out design allows rotating assembly to be removed without disturbing the volute or piping for ease of maintenance and service. PACO In-Line Pumps with discharge sizes 3 inch and larger feature a double volute design to reduce radial thrust and prolong bearing life. PACO type VLS Vertical In-Line Pumps eliminate costly installation steps. They require 1/3 the space of a conventional pump installation and drastically reduce the cost of layout foundation and piping.
	VLF - PACO type VLF is a frame mounted, In-Line Pump. The suction and discharge connections are the same size to simplify piping. Back pull out design allows rotating assembly to be removed without disturbing the volute or piping for ease of maintenance and service. Frame Mounted models feature flexible coupled drive and are available with steel or cast iron bases with drip-lip and drain tapping.

Vertical Top Connected Pump

	VSM - PACO type VSM is a close coupled, vertically mounted Top Suction/Top Discharge Pump. The suction and discharge connections are the same size to simplify piping. The design incorporates an internal suction baffle to provide laminar flow and suction and discharge bends, eliminating the need for suction diffusers, angle type valves and/ or elbows. The type VSM design incorporates a short shaft with minimum overhang reducing shaft deflection. Top pull out design allows rotating assembly to be removed without disturbing the volute or piping for ease of maintenance and service. PACO Vertical Space Miser Pumps feature an exclusive double volute design to reduce radial thrust and prolong bearing life.
	VSMS - PACO type VSMS is a split coupled, vertically mounted Top Suction/Top Discharge Pump. The suction and discharge connections are the same size to simplify piping. The design incorporates an internal suction baffle to provide laminar flow and suction and discharge bends, eliminating the need for suction diffusers, angle type valves and/ or elbows. The type VSM design incorporates a short shaft with minimum overhang reducing shaft deflection. Top pull out design allows rotating assembly to be removed without disturbing the volute or piping for ease of maintenance and service. Further, a separate seal housing allows simplified seal replacement without the need to disturb the motor or pull the rotating assembly. Internal seals are standard, but external seals are available options. PACO Vertical Space Miser Pumps feature an exclusive double volute design to reduce radial thrust and prolong bearing life.

Submersible Non-Clog

QDSC -PACO type QDSC is a submersible, rail system disconnect, non-clog pump. The QDSC is provided with an adjustable case wear ring to help extend the pump life and maintain high efficiency levels. The QDSC's submersible motor has tandem seals mounted in an oil reservoir complete with moisture sensing probes. Each motor includes dual, normally closed, automatic reset thermostats to protect against an over temperature condition.

Dry Pit Non-Clog

	NCH - PACO type NCH is a horizontal, frame mounted, flexibly coupled, dry pit non-clog pump. The NCH features a Back pull-out design for ease of maintenance. The standard two port impellers are designed for large solids handling, provided with back pump-out vanes, and L-shaped wear plates. The NCH is standard fitted with rugged Class 30 cast iron, with several selections of optional alloy materials available.
	NCF - PACO type NCF is a vertical, stand mounted, flexibly coupled, dry pit non-clog pump. The NCF features a heavy cast iron suction elbow with a contoured cleanout for ease of maintenance. The standard two port impellers are designed for large solids handling, and provided with back pump-out vanes, and L-shaped wear plates. The NCF is standard fitted with rugged Class 30 cast iron, with several selections of optional alloy materials available.
	NCP - PACO type NCP is a vertical, stand mounted, shaft driven, dry pit non-clog pump. The NCP features a heavy cast iron suction elbow with a contoured cleanout for ease of maintenance. The standard two port impellers are designed for large solids handling, and provided with back pump-out vanes, and L-shaped wear plates. The NCP is standard fitted with rugged Class 30 cast iron, with several selections of optional alloy materials available.
	NCU - PACO type NCU is a horizontal, close-coupled, dry pit non-clog pump. The pump and motor are close-coupled using a common oversized shaft to help minimize deflection and extend both the seal and bearing life. The standard two port impellers are designed for large solids handling, and provided with back pump-out vanes, and L-shaped wear plates. The NCU is standard fitted with rugged Class 30 cast iron, with several selections of optional alloy materials available.
	NCVU - PACO type NCVU is a vertical, close-coupled, stand mounted, dry pit non-clog pump. The NCVU features a heavy cast iron suction elbow with a contoured cleanout for ease of maintenance. The pump and motor are close-coupled using a common oversized shaft to help minimize deflection and extend both the seal and bearing life. The standard two port impellers are designed for large solids handling, and provided with back pump-out vanes, and L-shaped wear plates. The NCVU is standard fitted with rugged Class 30 cast iron, with several selections of optional alloy materials available.

Submersible Sump Pumps

	PIP700 - PACO type PIP Submersible Sump Pumps offer a modern approach to pumping drainage and waste water. The compact pump and motor unit is installed out of sight, in the sump, conserving valuable floor space above the cover plate. The submersible motor features an oversized stainless steel shaft with mechanical shaft seal. All units come with a mercury switch level control having piggy back plug to allow automatic or manual operation.
	SL - PACO wet pit vertical column type sump pumps are designed and built for high performance, durability and versatility of operation. These vertical column type pumps are recommended for difficult pumping applications, including floor drain, sump basin and drainage when continuous operation is not required. The compact vertical design makes this PACO pump uniquely suitable and a favorite for mechanical room applications and parking structure sumps. Using PACO’s optional explosion proof motors and float switches, the SL is ideal for hazardous locations. Highly efficient, semi-open Class 30 grain cast iron impellers with accurately proportioned waterways, trimmed, machined and balanced, provide exceptional performance at temperatures up to 150ºF, and has earned the reputation as the industry standard for building trade applications. Stainless steel (below sub-plate) pumps are also available upon request for industrial applications.
	SM - PACO submersible sump pumps offer a modern approach to sump and drainage applications. The compact design and rugged Class 30 cast iron construction of the pump an motor make the PACO submersible uniquely suitable for installation requiring out of sight below grade pumping PACO's rugged submersible motor of heavy cast iron construction features an oversized stainless steel shaft, a tandem oil-lubricated mechanical steals, unique 2-probe moisture sensing and heavy duty ball bearing designed to withstand all radial and thrust loading throughout the entire pump operating ranged and in addition, they carry Underwriters Laboratory's (UL) label for Class 1, Division1, Group D environments, making this pump suitable for hazardous location applicationssubmersible motor is UL labeled Class 1, Div 1, Group D; features an oversized stainless steel shaft, tandem oil-lubricated mechanical seals, unique 2-probe moisture sensors, and heavy duty ball bearings designed to with